Hi Richard,
I enclose index.php to you to have a look.
Best regards
Lec. Huỳnh Anh Dũng
ACM/ICPC SUPERVISOR
FPT UNIVERSITY.
http://www.fpt.edu.vn http://www.fpt.edu.vn
From: Richard Lobb [mailto:richard.lobb@canterbury.ac.nz] Sent: Sunday, May 8, 2016 7:28 AM To: Huynh Anh Dung dungha@fpt.edu.vn; domjudge-devel@domjudge.org Subject: Re: [SPAM: 9.000] RE: Please help
Hi Huỳnh Anh Dũng
You're probably running a slightly different version of domjudge from me. And it looks like the layout of my email might have broken in your email client. You should look for the line:
if ( @$_POST['cmd']=='login' ) do_login();
in www/team/index.php, somewhere near line 29. If you can't find that line don't touch the code. It must have changed too much. If you do find that line, add the following line after it:
if ( @$_POST['cmd']=='register' ) do_register(); // ** ADD THIS LINE **
It would pay to look before pasting to make sure there isn't a call to do_register() somewhere already in your version of the code.
However, maybe an even better approach is for you to do absolutely nothing until/unless you hit the bug that this patch is meant to fix. The bug only shows if you navigate directly to the team index page in some way (e.g. with a saved link, or a link from somewhere else). If a user goes directly to your site base url and clicks login, everything should work anyway. We have a saying "If it isn't broken, don't fix it"!
Richard
On 08/05/16 12:17, Huynh Anh Dung wrote:
Hi Richard, Sorry, I make mistake to see different folder for first issue. Second issue please check I do insert right position ? Best regards
Lec. Huỳnh Anh Dũng ACM/ICPC SUPERVISOR FPT UNIVERSITY. http://www.fpt.edu.vn
-----Original Message----- From: DOMjudge-devel [mailto:domjudge-devel-bounces@domjudge.org] On Behalf Of Richard Lobb Sent: Sunday, May 8, 2016 4:54 AM To: domjudge-devel@domjudge.org mailto:domjudge-devel@domjudge.org Subject: Re: Please help
Hi Huynh Anh Dung
I don't think affiliations are included in the self-registration capabilities of the current DOMjudge release. We patched our own local version to do them. I attached our modified version of the file domserver/lib/www/auth.php. It requires users to select from the existing list of affiliations known to the site, or NOT KNOWN otherwise. It comes with no guarantees, but it work for us.
There's also a bit of an issue with self-registration: it works only if you get to the login screen by clicking the 'login' button, but not when you get to the same page by other routes, e.g. you enter an url like <servername>/team.index.php. A hack to fix that bug: in domserver/www/team/index.php, add a line after line 29 so that lines 29 to 30 read:
if ( @$_POST['cmd']=='login' ) do_login(); if ( @$_POST['cmd']=='register' ) do_register(); // ** ADD THIS LINE **
Hope that helps
Richard
On 08/05/16 08:58, Huynh Anh Dung wrote:
Hi Jaap, Please help how can enable affiliations in self register section. Thanks Jaap Nice week end. Best regards
Lec. Huỳnh Anh Dũng FPT UNIVERSITY. http://www.fpt.edu.vn
-----Original Message----- From: DOMjudge-devel [mailto:domjudge-devel-bounces@domjudge.org] On Behalf Of Jaap Eldering Sent: Saturday, April 30, 2016 8:29 PM To: domjudge-devel@domjudge.org mailto:domjudge-devel@domjudge.org Subject: Re: Please help
On 30-04-16 01:24, Huynh Anh Dung wrote:
When I run ./configure checking for cgroup_init in -lcgroup... yes
* default user........: root * runguard user.......: domjudge-run * webserver group.....: www-data - chroot...........: /chroot/domjudge - cgroup...........: /cgroup Up to this stage, I don’t know it is or not enable
What I'm looking for is actually the line below "webserver group" that says:
* use Linux cgroups...: yes/no
But when I logged in to your machine, /root/domjudge-5.1.1/config.log shows that cgroups are disabled. You have the package installed, but have not edited /etc/default/grub, so the kernel doesn't support cgroups yet.
As a side note, you should not install DOMjudge as root user. Instead create a separate user to install it as: DOMjudge will use 'sudo' to obtain root privileges only when needed.
Jaap
Did you install or copy runguard to the judgehost installation (under judgehost/bin)? This step is not explicitly listed in the documentation.
Not yet it is not listed in the document Best
Lec. Huỳnh Anh Dũng ACM/ICPC SUPERVISOR FPT UNIVERSITY. http://www.fpt.edu.vn
-----Original Message----- From: DOMjudge-devel [mailto:domjudge-devel-bounces@domjudge.org] On Behalf Of Jaap Eldering Sent: Saturday, April 30, 2016 10:57 AM To: domjudge-devel@domjudge.org mailto:domjudge-devel@domjudge.org Subject: Re: Please help
On 30-04-16 00:51, Huynh Anh Dung wrote:
Hi, I do follow exact with the help file and I do up to: -Install the necessary packages: # apt-get install libcgroup-dev (or # yum install libcgroup-devel on RedHat) - Edit grub config to add memory cgroup and swap accounting to the boot options. Edit /etc/default/grub and change the default commandline to GRUB_CMDLINE_LINUX_DEFAULT="quiet cgroup_enable=memory swapaccount=1". Then run update-grub and reboot. -Compile DOMjudge with cgroup support. Re-run ./configure and look for cgroup in the output.
And did the configure output say that cgroups were enabled?
How to rebuild : Then rebuild the runguard with make build. I only make all after re-run ./configure
Did you install or copy runguard to the judgehost installation (under judgehost/bin)? This step is not explicitly listed in the documentation.
Jaap
Upto that point, then I run ./judgedaemon Then I said no cgroup Best
Lec. Huỳnh Anh Dũng ACM/ICPC SUPERVISOR FPT UNIVERSITY. http://www.fpt.edu.vn
-----Original Message----- From: Jaap Eldering [mailto:jaap@jaapeldering.nl] Sent: Saturday, April 30, 2016 10:45 AM To: Huynh Anh Dung mailto:dungha@fpt.edu.vn dungha@fpt.edu.vn; domjudge-devel@domjudge.org mailto:domjudge-devel@domjudge.org Subject: Re: Please help
On 30-04-16 00:28, Huynh Anh Dung wrote:
Hi, I do install Cgroup follow but when I run ./judgedaemon it said "Not using cgroup" help
When you (re)ran configure did it say that cgroups were enabled?
Did you recompile and reinstall runguard (or the whole judgehost installation)?
Jaap
-----Original Message----- From: Jaap Eldering [mailto:jaap@jaapeldering.nl] Sent: Saturday, April 30, 2016 7:37 AM To: Huynh Anh Dung mailto:dungha@fpt.edu.vn dungha@fpt.edu.vn Subject: Re: Please help
On 29-04-16 21:26, Huynh Anh Dung wrote:
Hi Jaap, Can you look at 2 lines : # exec java -client -Xss8m -Xmx${MEMLIMITJAVA}k -DONLINE_JUDGE=1 -DDOMJUDGE=1 '$MAINCLASS' exec java -client -Xmx3g -DONLINE_JUDGE=1 -DDOMJUDGE=1 '$MAINCLASS' before you change and successfully run, I already change.
I recommend not to change it like that: then if you change the configured global memory limit, it will not affect Java submissions. Also, if you now reduce the memory limit below 3 GB, then java submissions will automatically crash because the JVM is trying to allocate more memory than is allowed by DOMjudge. NOTE: DOMjudge imposes the memory limit onto the whole Java VM, that's why this this whole MEMRESERVED variable is needed in the first place.
Jaap
P.S. If you have further questions, please return to using the mailinglist.
_______________________________________________ DOMjudge-devel mailing list DOMjudge-devel@domjudge.org mailto:DOMjudge-devel@domjudge.org https://www.domjudge.org/mailman/listinfo/domjudge-devel
_______________________________________________ DOMjudge-devel mailing list DOMjudge-devel@domjudge.org mailto:DOMjudge-devel@domjudge.org https://www.domjudge.org/mailman/listinfo/domjudge-devel
_______________________________________________ DOMjudge-devel mailing list DOMjudge-devel@domjudge.org mailto:DOMjudge-devel@domjudge.org https://www.domjudge.org/mailman/listinfo/domjudge-devel